Glass and aquarium adhesive

ترجمه این پست به زبان های دیگر نیز روی سایت هست: English Persian

Glass and aquarium adhesive

One of the many adhesives used in homes is glass and aquarium adhesive.

Adhesives are one of the most widely used tools for our lives.

Each type of adhesive is used according to the kind of work we have with them to give us the desired result.

So getting to know the types of adhesives helps us buy and use it properly.

 

Glass and aquarium adhesives are used for any place and place that needs sealing. The use of this adhesive is not limited to sealing.

The gel is made of silicone.

 

Silicon glue, which contains silicon and oxygen atoms, makes it resistant to water and, due to its chemical and thermal stability, is used in many areas.

These adhesives are available It also has a longer life and, of course, its price is a bit more expensive.

 

 

Sealing and sticking glass

Glass and aquarium glue is white, transparent and colored, which is commonly used in glass or sealing, its transparent and colorless model is most often used.

This adhesive is an excellent sealant and sealant that is durable and can be applied to almost any surface, including plastic, metal and glass.

The high strength of this high water and high adhesive adhesive will provide a strong, long-life bond between the glass.

 

Use of glass and aquarium adhesive

Some uses of glass and aquarium adhesives are given below:

One of the most common use of these adhesives is to fasten and fix the mirrors in the bathroom and toilets.
Use of this kind of adhesive, among other things, are the gaps and grooves around the bathroom, shower, window, desk and sink.
The glue is also used to make the aquarium. Glass sheets can be easily bonded to the surface of the aquarium easily.
The sealing of the ceiling, the roof gutter and the water outlet pipes are other uses of aquarium glue.
It is also used in the automotive industry.

 

Advantages of glass and aquarium adhesive

Resistant to sunlight

High thermal resistance
Highest motion capability
Longer life than other solutions
Long-term flexibility
Complete waterproof
Resistant to fungal and bacterial growth

Iranian brands of glass and aquarium glass

The brand “Caspian”, “Ghaffari” and “Razi” are among the best brands of glass adhesive in Iran.

How to use glass and aquarium glue in sealing

The use of this adhesive can be a hard, dirty and sticky work that to do this, follow these steps:

What tool do we need?

A glue pump (gun) silicone gun
And Standard Aquarium Adhesive
A sharp blade or knife
Knuckles

1.Preparing the place to get started

Before you begin, you must remove the remaining adhesive from the previous one. It can be done simply with a knife or a sharp blade.

The location should not be dirty or greasy .

Any environmental pollution can reduce the quality of the adhesive.

2.The surrounding area of adhesive

For the cleaner the location of the run, the width of the slit can be determined by tape.

This will help the cleaner the operation and the beautiful appearance of the work.

3. Prepare the Aquarium Adhesive Tape:

Using a knife or cutter, cut the pipe tip at a 45 ° angle.

Make sure the hole is small enough to make full control.

Then place the cartridge into the adhesive device (gun or glue pump).

4. Test, Test, Test!

If this is your first experience, do not hurry.

Patiently, before the start, test the pressure and flow of the adhesive on a piece of paper.

Remember: Silicone sealant glue should be flowing and not drip.

5. Primary application of aquarium glue:

Your glue gun should be kept at a 45 degree angle just above the surface so that you can control the flow of adhesive.

It’s a good idea not to stop the job until you reach the end of the gap.

After reaching the end of work, slowly stop working and remove the glue pump from the slot.

6. The process of shaping and leveling the surfaces

You can simply make a smooth device, such as a spatula, ice cream or even your finger along the glue gap, to create a smooth bond between the gap and the wall.
7. Remove the cover

The tape that we split around the place in Step 2 to clean the work should be removed quickly.

Because it is possible to dissolve the tape with the remaining materials from the adhesive.

8. Give time

To ensure that the glue is properly dried, give it 8 hours.

After that, the gap is safely sealed.

Pay attention to the following while working:

To use glass and aquarium glue, it is best to use a disposable plastic gloves to prevent adhesion to the skin of your hands.
To attach mirrors, an acidic glue should be used because acid glues cause corrosion of the mercury oxide used in the mirror.

.

.

Mahjam Glass builds a variety of mirrored models.

The plot of you, making of us.

You can decorate your house like a palace.