ترجمه این پست به زبان های دیگر نیز روی سایت هست: English Persian
Special glue for mirrors
Special glue for mirrors
Today, the use of mirror tiles and decorative mirrors in homes and workplaces has made it imperative to use mirror glue.
Decorative mirrors and mirror tiles
The use of decorative mirrors is one of the things used for home decoration these days.
These mirrors are usually made in mirror tiles.
Then they are mounted on the desired location with a special mirror glue.
These adhesives are available as two-way adhesives and mirror adhesives that are silicone and non-acidic.
Two-sided adhesives are used for fixing on the wall and non-acid silicone adhesive for final fixing.
Silicone adhesive
Silicone glue, or so-called aquarium glue, is a glue that has many uses.
Applications of silicone adhesive include sealing, making aquariums, gluing car parts and more.
This adhesive is highly resistant and can be used at any temperature.
Remember, this glue need a bit long time to dry and sometimes takes 48 hours to dry.
Types of silicone adhesive
Silicone adhesives are divided into two groups in terms of their chemical composition:
1-Acidic adhesives: These are known as stoxy adhesives and release acetic acid during drying.
These adhesives produce a thick smell like vinegar when dry.
2-Non-acidic adhesives: Known as neutral adhesives.
This glue is for mirror. Because mirrors are lined with mercury or other materials, the use of acidic adhesives can cause a reaction with mercury.
This type of silicone adhesive prevents corrosion in the mercury behind the mirror.
Mirror glue releases alcohol and non-acidic material when drying.
It also has higher durability and durability than stainless steel silicone adhesive and can be used in outdoor environments.
Plus, the special glue on the mirror does not emit odor when drying.
It should be noted that non-acidic silicone adhesives are slightly more expensive than acidic adhesives.
How to use mirror glue
The surface used should be dry, clean and non greasy.
Ambient temperature between 5 and 45 ° C when used.
It takes about 5 to 10 minutes for the mirror to stick to the surface.
Temporarily glue them with tape to prevent mirrors from shaking during installation.
Wait about 24 hours for the job to dry completely.
Do not use special glue on the mirror in a circular or cross-over manner.
To view the sample work done in the images above, see the link below:
Diamond mirror pattern tile mounting
The pictures you see in this post relate to one of our favorite glass installations. For this purpose, the picture has a logo.
MahjamGlass manufacturer of all kinds of mirror models.
Design from you, build from us.
You can decorate your home like a palace.
Connect with us on social networks:
And if you need email addresses and phone numbers, visit our contact page: