منو سریع

SHOP

send ticket

subscribe newsletter

پاسخگویی آنلاین در واتس آپ

Cutting the glass with diamonds

Cutting the glass with diamonds

ترجمه این پست به زبان های دیگر نیز روی سایت هست: English Persian

Cutting the glass with diamonds

One of the most common methods for glass cutting is Cutting the glass with diamonds.

In general, glass cutting is done in two common ways.

The first method is cutting with wheels made of hard steel or tungsten carbide.

But the second method is to use glass-based diamonds.

In cutting a glass with a diamond, the glass is cut from the marked place by drawing a line on the glass.

In fact, diamonds do not carry glass over glass. Rather, it creates a line and groove on the surface and the two parts of the glass are separated. In fact, these markings encourage the glass to start breaking from the designated places

Note that the security glass cannot be cut this way. Because this type of glass will be broken rather than split into two distinct pieces.

How to cut glass with diamonds

Cutting the glass with diamonds

Cutting glass with diamonds

In the method of cutting glass with diamonds, they place the glass on a suitable surface that does not scratch.

The surface of the glass is removed from the dirt . There should not be too much pressure on the glass surface when cutting.

For better results, you can pour some oil on the glass with a ruler before cutting.

After cutting, the sharp edges are smoothed with sandpaper.

Using a diamond cutter requires special skill, because if the tool cannot be used correctly to mark the lines, the glass will no longer be used.

Types of glass cutting

Diamond cutting glass tools have different types, but generally they can be divided into two types of pistols and pencils.

Most diamonds have a bunch of wood and some have a tank or a rigid body.

Inside these tanks is poured kerosene or glass oil to help the diamond when its cutting the line on the glass.
Pencil Diamond:

Cutting the glass with diamonds

Pencil Diamond

In some models of this type glass cutting , the body is metal and has ivory, which can be used to sand the newly cut edges after cutting the glass with diamonds.

cutting glass with pistol diamond

Cutting the glass with diamonds

Pistol Diamond

cutting glass uses a pistol diamond to draw curved shapes.

As technology evolves, newer types of diamonds are also made.

Nowadays large glass plates can be cut semi-automatically using CNC computer.

 

MahjamGlass manufacturer of all kinds of mirror models.

Design from you, build from us.

You can decorate your home like a palace.

 

Connect with us on social networks:

Iniestagram MahjamGlass

LinkedIn MahjamGlass

MahjamGlass Telegram Channel

And if you need email addresses and phone numbers, visit our contact page:

contact us

Leave a comment

Your email address will not be published. Required fields are marked *